Reolink Client setup and user guide, Reolink Client is an easy-to-use security camera system surveillance software. It enables you to locally or remotely access your IP cameras and NVRs on Mac computers. You can monitor and watch live streaming of your home and business anywhere and anytime. It allows you to get 24/7 continuous recording in your computers.
Get live streaming, play back clips, customize motion detection and more. Connect with your loved ones whenever and wherever you are.
Download the client: https://reolink.com/software-and-manual/
Note:
System requirement: Windows 7 or later and Mac OS 8.0 or later
How to Initially Set up Battery-powered Cameras via Reolink Client (New Client)
Step 1. Power on the camera and wait for the voice prompt: Camera has been started up. Please run Reolink App, add the camera and set it up.
Step 2. Click “+” icon on the top right corner, choose UID and type in the UID of the camera, and then, click Add to set it up.
User Manual
2
Reolink Client
Step 3. Click OK.
Step 4. Check Connect to WiFi, then click OK.
User Manual
3
Reolink Client
Step 5. Type in the WiFi information to configure WiFi for this camera. Please make sure that you enter the correct WiFi password.
Note:
Currently, the battery-powered cameras (except Argus 3 pro) only support 2.4GHz. It will not be able to connect to any Wi-Fi with 5GHz wireless frequency.
Step 6. A QR code will be generated and displayed on the screen of your PC. Please aim the camera at the QR code on your PC at a distance of about 20cm (8 inches) to let the camera to scan the QR code.
Step 7. When you hear the voice prompt “Scan succeeded“, click Finish to wait.
User Manual
4
Reolink Client
Step 8. After you hear the prompt “Connection to the router succeeded“, you can create a password and edit the name for the camera. After that, the initial setup process is finished.
User Manual
Read Next : Qcam SmartClient Player User Guide
5
Reolink Client
How to Initially Set up 4G Cameras via Reolink
Client (New Client)
Install the SIM card and power it up, then you may start the initial setup when you hear the voice prompt “Network connection succeeded“.
Step 2. Click “+” icon on the top right corner, choose UID and type in the UID of the camera, and then, click Add to set it up.
Step 3. Click OK.
User Manual
6
Reolink Client
Step 4. You can create a password and edit the name for the camera. After that, the initial setup process is finished.
User Manual
7
Reolink Client
How to Initially Set up WiFi Cameras via Reolink
Client (New Client)
Note:
For the initial setup, please power on the camera by a DC power adapter and also connect the camera to your router LAN port with an Ethernet cable, and then follow the steps below to set up your camera. Please make sure that your camera and your PC are in the same network.
Step 1. Launch Reolink Client, click “+” icon on the right top corner, then the Refresh icon, and then choose the device you want to add.
User Manual
8
Reolink Client
Step 2. Please type in the camera’s username and password, then click Login to log in to the device. The default username is “admin” and the password is blank (no password).
- □ X
reslink Live View Playback □ â O
Device Login X
< ►> 4 S %
My Device ©
If you want to modify the WiFi settings of the camera, please follow the steps below:
Step 1. Go to Device Settings > Network.
Step 2. Please select the SSID (network name) of your router that you would like to connect and type in the WiFi password. Please make sure you type in the correct WiFi password, and note the distinction between uppercase and lowercase letters, and special characters. Then, click Connect to save the setting.
User Manual
9
Reolink Client
After connecting the camera, you can unplug the Ethernet cable of the camera, and it will connect to the WiFi network.
How to Initially Set up PoE Cameras via Reolink
Client (New Client)
Note:
The setup steps of PoE cameras are the same as those of WiFi cameras, but the PoE cameras can be powered up by a PoE switch, a DC power adapter or an NVR. And they cannot be set for WiFi connection.
User Manual
10
Reolink Client
How to Initially Set up NVR or NVR Kits via
Reolink Client (New Client)
Step 1. Please plug the LAN port at the back of your NVR into your router with an Ethernet cable to access the internet.
Step 2. Click the “+” icon, select UID, then fill in the blank with the UID of NVR.
– □ x
f©®link Live View Playback El □ a O
i, 1
Scan Device(s) in LAN IP/Domain UID X
CS)
UID Type Here
R.
‘ Add
NVK Q >
Connected < M ►< ♦ ® **
User Manual
11
Reolink Client
Step 3. Please create device password then click Next.
Step 4. Create device name then click Finish.
User Manual
Read More : DW Spectrum Full User Guide
12
Reolink Client
Here is the brief introduction for the buttons on the Live View page of Reolink Client:
User Manual
13
Reolink Client
User Manual
14
Reolink Client
Display Settings
User Manual
15
Reolink Client
User Manual
16
Reolink Client
User Manual
17
Reolink Client
Audio and Light>Status LED
Note:
Status LED is only available for battery-powered cameras and E series cameras.
User Manual
18
Reolink Client
Audio and Light > Infrared Lights
You can choose Auto or Stay Off.
User Manual
19
Reolink Client
Audio and Light>Spotlight
You can manually adjust the brightness of the spotlight, and if the Night Mode is enabled, you can choose Auto or On as schedule.
Note:
This is only available for Reolink Lumus, Argus 3, Argus 3 Pro, E1 outdoor, RLC-811A, RLC-823A and Reolink Duo cameras.
User Manual
20
Reolink Client
Motion Detection Zone
Device settings > Detection Alarm > Detection Zone > Click Set Up.
Settings
01 811a-out
Detection Alarm
Camera
o Surveillance
Network
Detection Zone
Sensitivity
Motion Detection v
Smart Detection v
Tolerance
Object Size
Setup
User Manual
21
Reolink Client
Click Pen to create a zone over the area that you don’t want to receive alerts about. Please don’t forget to click the Save button to save your settings.
Sensitivity
Device settings > Detection Alarm >Sensitivity.
Select Sensitivity to set 4 time periods and Other Period and corresponding
sensitivity.
Note: You can adjust the sensitivity from 1 to 50 by dragging the slider. The higher
the value is, the more sensitive the motion detection will be.
User Manual
22
Reolink Client
For cameras supporting smart person and vehicle detection, you can also set the sensitivity for smart detection.
For smart person detection, you can adjust the sensitivity from 0 to 100 by dragging the slider, and the same is true for smart vehicle detection.
Tolerance
Alarm will be triggered only after the detection object stays in detection areas longer than the set time.
Note:
This setting is only available for the camera supporting the smart person and vehicle detection.
X
Settings
D Camera
O Surveillance
© Network Settings
fl Storage
O System
Smart Detection
Camera at high sensitivity detects moving objects with low-similarity
appearance to persons.
100
S • 0
Tolerance
Alarm will be triggered when a detection object stays in detection zone longer than the set time.
Os
a.
Os
Object Size
Moving objects that are smaller than the minimum object size or larger than the maximum object size will not trigger alarm.
Note:
This setting is only available for the camera supporting the smart person and vehicle detection.
User Manual
23
Reolink Client
Settings
a Camera
Camera at high sensitivity detects moving objects with low-similarity
Display
Stream
Light
appearance to persons.
Ş Surveillance
® Network Settings
s Storage
Q System
Tolerance
Alarm will be triggered when a detection object stays in detection zone longer than the set time.
—• 2S
® • 05
Object Size
Moving objects that are smaller than the minimum object size or bigger than the maximum object size will not trigger alarm.
Setup
User Manual
24
Reolink Client
Settings
a Camera
Camera at high sensitivity detects moving objects with low-similarity
Display
Stream
Light
appearance to persons.
Ş Surveillance
® Network Settings
s Storage
Q System
Tolerance
Alarm will be triggered when a detection object stays in detection zone longer than the set time.
—• 2S
® • 05
Object Size
Moving objects that are smaller than the minimum object size or bigger than the maximum object size will not trigger alarm.
Setup
Object Size
Moving objects that are smaller than the minimum object size or bigger than the maximum object size will not trigger alarm
s Vehicle
User Manual
25
Reolink Client
Device settings > Detection Alarm > Enable Alarm.
Sensitivity
You can drag the slider to adjust the PIR sensitivity.
x
Settings
0 Camera
Display
Stream
Audio and Light
Info
d Surveillance
© Network Settings
a Storage
O System
Detection Alarm
Enable Alarm
Sensitivity
Camera at higher sensitivity detects every small change in the field of view, such as a sneaky person at a distance.
• 80
RF Schedule
User Manual
26
Reolink Client
PIR Schedule
If you want to set the camera to be triggered by motion at specific times, please click Motion, and select the squares to enable the PIR motion sensor.
Otherwise, please click None.
Then click a to save the settings.
Settings
a Camera
Camera at higher sensitivity detects every small change in the field of view, such as a sneaky person at a distance.
80
RF Schedule
Display
Stream
Battery
Audio and Light
Info
□ Surveillance
® Network Settings
fl Storage
O System
User Manual
27
Reolink Client
You may follow the steps below to set an email alert for your device on Reolink Client.
Step 1. Log in to your camera and go to camera Settings > Surveillance > Enable
Email Alerts.
Settings
o Camera
Display
Detection Alarm
0 Surveillance
Buzzer
© Network Settings
fl Storage
O System
Enable Email Alerts
Email Settings —
SMTP Server smtp.gmail com
Enable SSLorTLS
SMTP Port (1-65535)
465
Sender Name
NVR
Sender Address
| type Here
Password
Step 2. Fill in the information required.
Please choose the right SMTP Server, turn on Enable SSL or TLS, and enter the right SMTP Port, Sender Address, Password, and Recipient Address 1. And choose the Email Content, Interval, and Schedule based on your need. Then click Save.
SMTP Server and STMP Port: It may vary depending on your email service provider. If you are using Gmail as the Sender Email, you may leave the default SMTP Server (smtp.gmail.com) and default port (465) unchanged. However, if you set other emails such as Hotmail and Yahoo mail as the Sender Email, you will need to input the corresponding SMTP server & SMTP port.
Sender Address: Input the address of the email that sends out motion alert emails. Password: Input the password of the sender email.
User Manual
28
Reolink Client
Recipient Address: Input the address of the email that receives motion alert emails. The recipient address can be the same as the sender’s address. Attachment: Select the content (text, picture or video) to attach to the motion-alert motion email.
Email Interval: Once set, only one motion-alert email will be sent even if the alarm is triggered multiple times during the time interval.
Note:
Once the battery-powered camera goes into standby mode, the email interval setting will be invalid. The motion-alert email will be sent every time the camera is triggered even for the same motion alert.
Email Schedule: Set the time that you want your cameras to send you email alerts. It is currently not available for Reolink battery-powered cameras.
Notes:
|
reolink |
Live View |
Playback |
|
– □ X □ ■ O |
|
|
Scan Device(s) in LAN IP/Domain |
UID |
X |
|
||
|
|
|
|
|
|
|
|
Add New |
You are adding a battery-powered IP camera! To avoid battery drainage, please reduce the live viewing time OK |
|
|
|
|
|
Click the □ b right side of th add new < < |
|
|
Add |
«1 |
|
|
Icons |
Meanings |
|
£0} |
Enter the local settings page |
|
□ |
Lock/unlock the Reolink Client |
|
X |
Exit the Reolink Client |
|
|
Add device |
|
— |
Minimize |
|
□ |
Maximize |
|
|
Resize |
|
|
Shows that motion is detected |
|
|
Take snapshot manually |
|
Öd |
Start manual recording |
|
Q. |
Clip |
|
<0- |
PTZ |
|
‘W’ |
Turn on spotlight |
|
■jjj- |
Enable audio alarm |
|
|
Expand NVR device list |
|
£0} |
Enter the device settings page |
|
Q |
Edit the login information |
|
|
Retry |
|
|
Hide device list |
|
|
Enter the next live stream page |
|
|
Enter the previous live stream page |
|
| |
Adjust the volume |
|
|
Divide the screen into multiple windows |
|
|
Enable/disable two-way audio |
|
|
Enter the full screen (To exit the full screen, right click on the screen or hit ESC on the keyboard) |
|
|~fr |
Battery |
|
|
WiFi signal |
|
4G |
4G camera |
|
Icons |
Meanings |
|
|
Client local settings |
|
r |
1 X 128 |
|
Settings |
|
|
|
Sharpness |
|
0 Camera |
|
|
|
Brightness & Shadows |
|
|
Color Day Mode |
|
Detection Alarm |
Auto v |
|
Audio and Light |
Black & White |
|
D Surveillance |
Auto v |
|
($) Network Settings |
Color Night Mode |
|
9 Storage |
Manual v |
|
|
Brightness |
|
O System |
|
|
|
Shadows |
|
|
Default |
|
k |
J |
|
Options |
Meanings |
|
Flip |
Turn the image upside down. |
|
Mirroring |
Make the orientation of the image to be horizontally reversed. |
|
Camera Name |
Set the position that the camera name shows on the screen. |
|
Date &Time |
Set the position that the date & time shows on the screen. |
|
Watermark |
Display the watermark (shows as the Reolink logo) on the screen. |
|
Anti-Flicker |
Turn on the option when devices such as TV screens or lights are flickering. 50GHz: Used for Australia and the UK. 60GHz: Used for the USA and Canada. Other: Other values except 50GHz and 60GHz Off: Turn off the option |
|
Day and Night |
Set different color modes during different times of the day and night. Color: The camera will display a color image and the mode is usually used in the daytime. Black & White: The camera will display images only in black and white and the mode is usually used during the night when the IR LEDs are on. Auto: The camera will automatically switch between Color and Black& White according to the light conditions. |
|
Privacy Mask |
Mask out defined areas in surveillance videos, whether live or recorded, to protect the privacy of users. Notes: Motion in masked areas will still be detected if it happens in motion detection zones. For battery-powered cameras, the number of the masked areas is up to 3, while for other IP cameras, it is up to 4. Cameras in WiFi NVR kit doesn’t support this option. |
|
Brightness |
Modify the value to set how light the image appears to be. |
|
Contrast |
Modify the value to increase or decrease the difference between the brightest white and the darkest black in an image. |
|
Saturation |
Modify the value to alter the number of colors displayed in an image. The higher the value is, the brighter and more vivid the color will appear to be. |
|
Sharpness |
Sharpening the image will increase the signal-to-noise ratio. |
|
Color Day Mode |
In Color Day Mode, you can adjust the light brightness by choosing Auto or Manually. Auto: The camera will automatically adjust the brightness and shadow according to light conditions. Manually: Manually adjust the brightness and shadow according to light conditions. |
|
Black&White |
In Black & White mode, you can adjust the light brightness by choosing Auto or Manually. Auto: The camera will automatically adjust the brightness and shadow according to light conditions. Manually: Manually adjust the brightness and shadow according to light conditions. |
|
Default |
Restore the camera to its factory image settings. |
|
Sun |
■ |
■ |
■ |
■ |
■■■■■■ |
■ |
■ |
■ |
■ |
■■■■■ |
|
■ |
■ |
|
■ |
|
Mon |
|
|
|
|
|
|
|||||||||
|
Tue |
■ |
■ |
■ |
■ |
■■■■■■ |
■ |
■ |
■ |
■ |
|
■ |
■ |
■ |
■ |
■ |
User Manual
29
Reolink Client
Step 3: Click the Email Test to verify whether the information you have entered is correct.
The prompt “Succeeded” will appear if the email has been successfully set.
User Manual
30
Reolink Client
Battery-powered cameras, E series and Lumus
Device Settings > Surveillance > Siren > Enable Siren.
User Manual
31
Reolink Client
RLC-811Aand RLC-823A
Device Settings > Camera > Audio and Light > Adjust the volume for alarm and speaker.
NVR
Device Settings > Surveillance > Buzzer > Enable Buzzer.
Then you can set the buzzer schedule for different cameras connected to the NVR. For the cameras supporting the smart person and vehicle detection, you can set schedule for Any Motion, Person and Vehicle.
User Manual
32
Reolink Client
Settings
û Camera
Display
Stream
Detection Alarm
Audio and Light
0 Surveillance
Buzzer
EggMe Buzzer
Schedule
01 811a-out
Alarm
© Network Settings
fl Storage
O System
y Any Motion (j Person Q Vehicle
Enable
Disable
Please refer to the steps in Spotlight of the Chapter 3.
User Manual
33
Reolink Client
|
|
|
|
|
|
X |
|
Settings |
Siren |
|
|
|
|
|
a |
Camera |
The siren wi |
II sound when motion |
i is detected. |
|
|
|
Display Stream |
o |
|
|
|
|
|
Detection Alarm |
|
|
|
|
|
|
Battery |
|
|
|
|
|
9 |
Surveillance |
|
|
|
|
|
|
Record |
|
|
|
|
|
A |
Network Settings |
|
|
|
|
|
a |
Storage |
|
|
|
|
|
o |
System |
|
|
|
|
|
|
|
|
|
|
J |
Battery-powered cameras
Device Settings > Surveillance > Record > Enable Record.
You can also set the Post-Motion Record.
User Manual
34
Reolink Client
IPCsand NVRs
Device Settings > Surveillance > Record > Enable Record.
Overwrite: When the SD card or HDD is full, the old recording files will be overwritten for new recording files.
Pre-Motion Record: The camera will start recording before the event happens. The duration of the pre-motion record will be 3-8 seconds, varying by model and hardware version.
Post-Motion Record: The camera will continue recording after the event happens. The duration of the post-motion record may vary by model.
Pack Duration: The Reolink NVR packs each recording into a separate video file and stores it on the hard drive inside the NVR. Pack duration refers to the length of the recording that is packed into a file.
If you set the pack duration as 30 minutes, the NVR will pack the recording to a file every 30 minutes and store it to the hard drive inside the NVR.
Note:
Pack Duration is only available for Reolink NVRs.
Record Schedule
Select Motion or None, then set the schedule as you need by choosing the squares. One square presents one hour. Click Save to save the settings.
User Manual
35
Reolink Client
Notes:
|
Settings Û Camera Display Ş Surveillance Buzzer Push ® Network Settings S Storage 0 System |
|
1 |
Record Enable Record • Overwrite • Pre-Moöon Record • Post-Motion Record 2 mins v Pack Duration 60 mins v Schedule 01 811a-out v Alarm Timer |
X |
Settings
a Camera
Display
Stream
Detection Alarm
Audio and Light
□ Surveillance
FTP
Buzzer
Push
® Network Settings
s Storage
Q System
X
I T 1 I
60 mins v
Schedule
01 811a-out
Alarm Timer
✓ Any Motion 7 Person ✓ Vehicle
<r f
Enable Disable
Apply to Other Cameras Save
J
User Manual
36
Reolink Client
Step 1. Go to Device Settings > Surveillance > FTP, and fill in the FTP information required.
X
Network Settim
Storage
FTP Settings
FTP Settings
System
FTP Server: Type in the address of your FTP server and FTP port. The default FTP port for Reolink products is 21.
Username and Password: Enter the username and password of your FTP server. If the username and password are not required, please enable Anonymous.
Directory: Set an upload directory for device video recording.
File Type: Choose to upload both videos and images, or images only.
FTP Postpone: Set the record time limit after motion is detected. This option is only available when File Type is set as Video and FTP Schedule as Motion.
Interval: Set the time interval for uploading pictures. This option is available when File Type is set as Picture. Custom is available and the minimum time interval is 2 seconds.
Step 2. Configure the FTP upload schedule, and click Save to save the settings.
User Manual
37
Reolink Client
Settings
o Camera
Display
Stream
Detection Alarm
Audio and Light
Info
0 Surveillance
Schedule
Alarm Timer
Record
FTP
© Network Settings
9 Storage
O System
✓ Any Motion Q Person Q i Vehicle
Disable
Enable
Save
Note:
Timer means that the camera will record 24/7, while Alarm means that the camera will record when motion is detected.
Step 3. Click FTP Test to check whether the FTP has been set up successfully.
User Manual
38
Reolink Client
Playback and Download Recordings
Here we will guide you to play back recorded videos on the Reolink Client by the following steps:
Step 1: Launch the Reolink Client and log in to your camera/NVR, and then click Playback button to enter the Playback page.
Step 2: Drag and drop the camera from the left side menu to the playback
interface.
User Manual
39
Reolink Client
Step 3: Choose a date. The dates of recordings will be marked in blue. Left-click the blue bar to select the time of recordings you want to play back.
Step 4: Click the Download button, and then check the recorded videos you want
to download.
reelink
NVR O >
Connected
Live View
Playback
0
Not connected o
CAM 6 -Michaee… 0
Not connected o
0
Incorrect Password
Reolnk camera O
09 / 2021
Sun Mon Tue Wed Thu Fri Sat
Fluent
00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23
12 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
P 26 27 28 29 30
Reolnk ca…
No Channel
No Channel
No Channel
r
□ a o
User Manual
40
Reolink Client
Step 5: Click Download to start downloading videos.
Download
2021-09-26
Channel Reoink ca
Time oo v oo * oo v
23 V 59 V 59 V
Type motion
Choose All
K < 1 > X
User Manual
41
Reolink Client
|
reelink |
Live View PI |
– □ X ay^ack □ ö ö |
|
NVR O > Connected © Not connected D © Not connected O B Incorrect Password Reolnk camera O Connected © Not connected d |
|
|
|
© Not connected o |
|
|
|
RG Camp Area -… al Closing… D |
K 00:00:00 < ( ► ) 26/9/2021 O |
S f ® 4 ‘« |
|
|
File Name |
Device |
Type |
Start Time |
Duration |
Size |
|
|
Reolnk camera-012… |
Reolnk camera |
motion |
02:00:20 |
00 : 01 : 07 |
1.77MB |
|
—> |
Reolnk camera-012… |
Reolnk camera |
motion |
06:23:52 |
00 : 01 : 04 |
10.61MB |
|
□ |
Reolnk camera-012… |
Reolnk camera |
motion |
07:45:21 |
00 : 00 : 58 |
2.51MB |
|
□ |
Reolnk camera-012… |
Reolnk camera |
motion |
07:53:22 |
00 :00: 36 |
1 68MB |
|
□ |
Reolnk camera-012… |
Reolnk camera |
motion |
07:54:08 |
00 :00: 26 |
1 22MB |
|
□ |
Reolnk camera-012… |
Reolnk camera |
motion |
08:56:52 |
00 : 00 : 28 |
1 34MB |
The following steps will guide you through how to set up Local Record Schedule via the New Reolink Client.
Step 1. Launch the Reolink Client and click Client Settings.
Step 2: Go to the Record page and turn on Enable Record to enable local recording. Then choose the record type (Timer, Motion, and None) and choose the squares to set the recording schedule. Click the Save button to save the settings, and the camera will start recording as you set.
User Manual
42
Reolink Client
Client Settings
General
fid Record
Mins
Record Videos to
C:\Users\BAICHUAN-85Wideos\reolink Browse
Video Recording Folder Size •
5 GB
Low Disk Space Warning 1024 MB
Local Record Schedule
About Reolink
Enable Record
5
Notes:
User Manual
43
Reolink Client
Add a Camera or NVR to the New Reolink Client by Entering the UID
If your camera/NVR is not on the same LAN as your PC (on a different network), you may follow this guide to add the camera via UID. Then you can view your cameras via WAN (remotely).
Notes:
Step 1. Click the “+” icon, select UID, then type in the UID of your camera.
User Manual
44
Reolink Client
Step 2. Then input the user name (“admin” by default) and the camera password After that, click Login to add your camera to the Reolink Client.
Add a Camera or NVR to the Reolink Client by Manually Entering IP Please follow the steps below to add a camera or NVR to your Reolink Client. Step 1: Please find the IP address of your device, and you may find the IP address of your device while scanning in LAN or in your router interface.
Step 2: Once you know your device IP address, please click the “+” button, choose IP/Domain, then manually enter the device IP address. The default port is 9000. And then click the Add button.
User Manual
45
Reolink Client
Scan Device(s) in LAN
UID
X
IP/Domain Type Here
PORT 9000
Add
Step 3: Then input the user name (“admin” by default) and the camera password. After that, click Login to add your camera to the Reolink Client.
Device Login X
My Device
Login
Add Cameras or NVRs in LAN via the Reolink Client
When your cameras or NVRs are on the same LAN as your PC, you may add them via the Reolink Client easily referring to the following methods: Method 1. Automatically Add
If the Add Device Automatically option under the General settings has been enabled and the camera password is the default one (blank password), the device will automatically show up in the device list and you can directly view the live feeds of this camera.
User Manual
46
Reolink Client
If the Add Device Automatically option under the General settings has been enabled and you have set a password for it via other devices, the device will also automatically show up in the device list but with an error prompt “Incorrect Password“.
Client Settings
Record
General
Run at Startup
Automatic Client Update
Devices Automatically
Stretch Mode
Alarm Beep
Lockscreen Password
Language
English
About Reolink
Download Path
User Manual
47
Reolink Client
Method 2. Scan Device in LAN
Choose Add Device > Scan Device(s) in LAN to scan your Reolink device.
Cameras in the same local network will automatically show up. Click the “+” button to add it.
Scan De’
) in LAN IP/Domain UID
If the “Incorrect Password” error prompts, please click the left Edit button to enter the camera login password, then you will able to see the live stream.
User Manual
48
Reolink Client
You may follow the steps below to delete your camera or NVR from the Reolink Client.
Step 1. Right click the camera in the device list.
Step 2. Click Delete.
Note:
If you want to delete a camera in LAN while it is still connected, please disable Add Devices Automatically first; otherwise, the camera will show up again after deleted.
User Manual
49
Reolink Client
Go to Client Settings > General.
You can enable Run at Startup, Automatic Client Update, Add Devices Automatically, Stretch Mode, Alarm Beep, Lockscreen Password, and you can also set the Language.
Client Settings
Record
General
Run at Startup
Automatic Client Update
Add Devices Automatically
Stretch Mode
Alarm Beep
Lockscreen Password
Language
English
About Reolink
Download Path
User Manual
50
Reolink Client
Log in to your device and go to Device Settings > Network Settings. Check the
WiFi signal and network information of your device.
User Manual
51
Reolink Client
Camera Settings > Network Settings > Click —- > Choose another WiFi you want
to connect.
User Manual
52
Reolink Client
User Manual
53
Reolink Client
Check/Format the Micro SD Card
You may follow the steps below to check or format the micro SD card in Reolink cameras via the Reolink Client.
Step 1. Go to the Device Settings > Storage.
Settings
o Camera
Stream
Audio and Ligt
Storage
SD Card
14.43 GB/15GB
Ş Surveillance
© Network Settings
■ «8».
Q System
User Manual
54
Reolink Client
Step 2. You can check the information about this SD card on this page. You can
also click the SD card to format the SD card, and then click OK to confirm.
User Manual
55
Reolink Client
For cameras
Method 1. Right click the camera in the device list, and click Get Info.
User Manual
56
Reolink Client
Method 2. Device Settings > Camera > Info.
r 1
x
Settings
o Camera
Info
Stream
Detection Alarm
Network Settings
s Storage
0 System
Date & Time
For NVRs
The first method for NVR is the same as that for cameras.
Method 2. Device Settings > System > Info.
Settings
Û Camera
Display
Stream
Detection Alarm
Audio and Light
a Surveillance
($) Network Settings
fl Storage
0 System
User Management
Date & Time
Maintenance
lf^
Info
User Manual
57
Reolink Client
Note:
This is only available for the battery-powered cameras.
Device Settings > Battery.
You can check whether the battery is charged and the running time in the last 30 days.
User Manual
58
Reolink Client
Step 1. Launch the Reolink Client and log in to your device.
Step 2. Click Device Settings > System > User Management, then select the user and click the Change Password button.
Notes:
|
|
X |
|
Settings |
Network Settings |
|
|
Saved Wi-Fi network |
|
Camera |
|
|
|
|
|
Display |
|
|
|
|
|
Stream |
|
|
Detection Alarm |
Network Status |
|
Battery |
IP Address |
|
Audin and 1 inht |
Subnet Mask 255.255.255.0 |
|
Info |
Gateway |
|
|
Preferred DNS 192.168.1.1 |
|
B Surveillance |
|
|
|
Alternate DNS |
|
® Network Settings |
MAC Address 78:DB:2F:CA:F9:90 |
|
fl Storage |
|
|
0 System |
|
|
|
|
|
F |
|
|
|
|
Wi-Fi Settings x Current Network Connection HYPE A Wireless Network © Galaxy S9Ö7İC A T Optus_B818_AF38 A T □5 Add Wi-Fi Info Manually |
|
|
k |
|
|
|
You can also add the WiFi information manually. |
||
|
r |
Wi-Fi Settings x Current Network Connection HYPE A Wireless Network © OptUS_B818_AF38 A V Add Wi-Fi Info Manually SSID |
|
|
|
Password Connect |
|
|
|
|
|
|
k |
|
|
|
Camera Name |
Reolnk camera |
|
Model |
RLC-822A |
|
Build No. |
build 2104083340 |
|
Hardware No. |
IPC_523128M8MP |
|
Config Version |
V3.0.0.0 |
|
Firmware Version |
v3.0.0.231_2104083340 |
|
Details |
IPC_523128M8MPS16AE1W0110000000 |
|
Device Name |
NVR1 |
|
Model |
RLN16-410 |
|
Build No. |
build 2109235 |
|
Hardware No. |
H3MB18 |
|
Config Version |
V3.0.0.0 |
|
Firmware Version |
v3.0.0.141_21092305 |
|
Details |
NVR661610104001000200000 |
Step 3. Type in the old password (If the old password is the default one, please leave the password field blank) and set a new password, and then click Save.
User Manual
59
Reolink Client
Step 1. Launch the Reolink Client and log in to your device, and then go to
Device Settings > System > Date & Time.
Step 2. Set the Time Format and Date Format according to your local time.
User Manual
60
Reolink Client
NTP
Device Settings > Network Settings > Advanced > NTP Settings > Click Set Up.
You can choose the NTP Server and then click Synchronize, and you may get the “Succeeded” message at the bottom, indicating that the synchronization has succeeded.
User Manual
61
Reolink Client
The following steps will guide you through how to reboot or restore your Reolink camera and NVR via the new Reolink Client.
Step 1. Please go to Device settings > System > Maintenance > Restore or Reboot.
And you can set the Auto Reboot Time for the camera.
X
Settings
Camera
Önüne Upgrade
Check tor Latest Version
Disp
Firmware Upgrade
Deted
Browse
Update Configure Ale
Upgrade
Surveillance
Auto Reboot
Network Settings
Storage
Auto Reboot Tene
Every Sunday
System
00
00
ment
Date & Time
02
Default Settings
Note:
Restore will return your camera settings to its factory status.
User Manual
62
Reolink Client
You may follow the steps below to upgrade firmware for Reolink cameras/NVRs via the new Reolink Client.
Note:
Please make sure that you have already downloaded the correct firmware for your device model and version from the Reolink Download Center and unzipped the .pak file before upgrading.
Step 1. Launch the Reolink Client and log in to your camera/NVR, then go to
Device Settings > System > Maintenance.
Step 2. Click Browse to select the correct firmware file and click Upgrade to start. Note:
If you don’t want to restore your camera or NVR settings to factory status, please uncheck the Update Configure File option.
Settings
□ Camera
Display
Detection Alarm
Info
Ş Surveillance
® Network Settings
s Storage
0 System
User Management
Date & Time
Maintenance
k
Maintenance
Auto Focus
Browse
Export
Auto Upgrade
Online Upgrade
Check for Latest Version
Firmware Upgrade
Auto Reboot
User Manual
63
Reolink Client
|
r Settings |
Date & Time |
1 X |
|
Q Camera Display |
(GMT+0800) Beijing 26/03/2021 18:51:13 |
|
|
Stream Detection Audio and Light □ Surveillance (ifi) Network Settings 9 Storage O System Date & Time k |
Time Fonnat 24h time format v Date Fonnat DD/MM/YYYY v |
|
Q1: What is the maximum number of cameras added and displayed via the new Reolink Client?
The new Client does not have a limit on the number of cameras or NVRs. That’s to say you can add as many cameras or NVRs as you like.
Q2: What are the requirements of the protection password for the Reolink Client? The protection password of the Reolink Client must be 1 to 28 characters. It has no restrictions on special characters.
Q3: What languages does the Reolink Client support?
Chinese; English; French; German; Finns; Swedish
Warning for the Reolink Client from Antivirus Software
Cause 1: Unofficial Download
Solution: Download the software in the download center.
Cause 2: False Warning
Solution:
Note: Reolink Client is safe and will not pose any threat to your computer, please rest assured to use it.
Forget the Password for the New Reolink Client ( Windows)
If you set a client password on Reolink windows client before but can’t remember it, you can follow these steps to solve this problem.
Step 1. Go to the AppData folder manually by entering the user folder in the C drive.
The path is C:\Users\ADMIN.
Step 2. Go to the View tab at the top and check the Hidden items checkbox, as
User Manual
64
Reolink Client
shown below:
I n File Explorer
Home Share
File
2
3
Navigation
pane ‘
Panes
Layout
Options
‘f’ & > Quick access
Search <
4
□ Item check boxes
I | File name extensions
■7771 Hide sei
iten
lidden items
jJ” Quick access
Frequent folders (7)
Show/hide
Step 3. You will be able to see the AppData folder in your User folder. Go to AppData > Roaming, then delete the reolink folder.
2020/12/18 7:53
2021/1/25 14:57
Step 4. Done! You can turn on the Reolink Client without a password now.
User Manual
65
|
Medium icons |
U Small icons |
|
88 List |
|zz Details |
|
B– Tiles |
|= Content |
|
|
0 |
|
Current |
Show/ |
|
view” |
hide ‘ |
|
nistrator\AppData\Roaming 1 |
– |
||
|
> |
|
Administrator > AppData > Roaming |
v Ö ‘Roaming* |
|
A r |
tastpdf 2020/11/12 7:54 X1$* AleZilla 2021/1/18 14:17 XW Fnlnformation 2020/12/18 9^)3 Foxit Software 2020/12/18 9:09 X<4^ Foxmail7 2021/1/24 19:33 GameHall_2345 2020/6/22 12:26 X<tX Helper_2345 2021/1/25 12:00 X#* HuDun 2020/6/1 18:04 huifubanhr 2020/4/12 13:24 Xf^^ InsLogicCfg 2020/7/21 14:02 IQIYI Video 2020/4/12 13:24 JuziBrowser 2018/11/27 15:08 Xf$55 kdeaner 2020/6/7 8:07 Xft3( kingsoft 2020/12/19 7:57 XltX ksoftmgr 2020/5/30 9:55 KuGou8 2020/6/21 8:36 KUT 2020/6/1 17:57 XltX Maxthon5 2018/11/27 15:08 X#X Microsoft 2020/8/11 15:04 XttX MiniPage_2345 2021/1/25 13:30 obs-studio 2020/11/17 18:53 X1$3? Opera Software 2018/11/27 15:08 Proxifier 2020/4/21 14:51 |
||
